Showing all 15 results

  • C01 Expanding Connector

    POA
    The expanding Connector is designed to provide an in line joint between tubes of the same diameter, and a wall thickness of 3.2mm. It fits flush with the tube surface and can be located inside other fittings. It must not be used as a load-bearing joint, for such applications use a FastClamp type C00.
    # Tube Size A B kg
    G2533.7 75 19 0.18
    G3242.4 75 19 0.27
    G4048.3 75 19 0.35
    View Size Chart...
    Clear selection
  • C02 90° Elbow

    POA
    The 90° Elbow is designed to provide a joint between two tubes at right angles to each other. Often used for railing ends and corners.
    # Tube Size A kg
    G2026.9 40 0.24
    G2533.7 48 0.39
    G3242.4 60 0.53
    G4048.3 67 0.68
    G5060.3 86 1.53
    View Size Chart...
    Clear selection
  • C03 Short Tee

    POA
    The Short Tee is designed to provide a butt joint between two tubes at right angles to each other. Often used for railing ends and tops. If tubes need to be joined inside the fitting then a C04G type should be used.
    # Tube Size A B kg
    G2026.9 40 38 0.21
    G3242.4 60 54 0.44
    G4048.3 67 60 0.56
    G5060.3 86 71 0.76
    View Size Chart...
    Clear selection
  • C04 Long Tee

    POA
    The Long Tee is designed to provide a butt joint between two tubes at right angles to each other. Often used for railing ends and tops. It allows the through tube to be joined inside the fitting. An alternative is the C03G type fitting.
    # Tube Size A B kg
    G2026.9 40 80 0.35
    G2533.7 48 96 0.52
    G3242.4 60 120 0.77
    G4048.3 67 134 0.88
    G5060.3 86 172 1.33
    View Size Chart...
    Clear selection
  • C245 Three Socket Tee (30° to 45°)

    POA
    This fitting is used on Safety Railing with slopes be-tween 30° & 45° and fixes the top rail to a vertical intermediate upright
    # Tube Size A kg
    G3242.4 180 0.95
    G4048.3 216 1.22
    View Size Chart...
    Clear selection
  • C42 Clamp on Crossover

    POA
    The Clamp on Crossover is designed to allow a new tube to be joined to an existing structure.
    # Tube Size A B C D kg
    G2026.9 40 28 28 28 0.15
    G2533.7 48 34 34 34 0.27
    G3242.4 58 43 43 43 0.47
    G4048.3 65 49 49 49 0.54
    G5060.3 78 62 61 61 0.74
    View Size Chart...
    Clear selection
  • C48 90° Corner Swivel Combination

    POA
    The 90° Corner Swivel Combination is designed to provide an angled joint at a post, this is suitable for the mid rail of sloping handrail or to provide bracing to a structure.
    0.751.001.121.46
    # Tube Size kg
    View Size Chart...
    Clear selection
  • C62R Ratchet Keys

    POA
    The Ratchet driver and dual keys are available to speed assembly. The Ratchet driver will allow tightening to the correct torque.
    # Tube Size
    RAll Sizes
    View Size Chart...
    Clear selection
  • Wall to Floor Mounted Hanging Rails

    POA
    # Tube Size A
    G2533.7 75
    View Size Chart...
    Clear selection
  • Placeholder

    Wall to Floor Mounted Extension Kit

    POA
    # Tube Size A
    G2533.7 75
    View Size Chart...
    Clear selection
  • Wall to Floor Mounted Garment Rail

    POA
    # Tube Size A
    G2533.7 75
    View Size Chart...
    Clear selection
  • Freestanding Vertical Double Garment Rail inc. Braked Wheel

    POA
    # Tube Size A
    G2533.7 75
    View Size Chart...
    Clear selection
  • Freestanding Vertical Single Garment Rail inc. Braked Wheel

    POA
    # Tube Size A
    G2533.7 75
    View Size Chart...
    Clear selection
  • Freestanding Vertical Single Garment Rail

    POA
    # Tube Size A
    G2533.7 75
    View Size Chart...
    Clear selection
  • Freestanding Vertical Double Garment Rail

    POA
    # Tube Size A
    G2533.7 75
    View Size Chart...
    Clear selection