Rapid turnaround from drawings
A huge range of products to choose from
Experienced staff always happy to help!
40+ years in the industry
Most products in stock and ready to dispatch

Products

  • Tube 900mm

    POA
    We offer a cutting service. If you require tube cutting for shorter lengths, please contact us for a quote.
    # Tube Size A
    G2026.9 3200
    G2533.7 3200
    G3242.4 3200
    G4048.3 3200
    G5060.3 3200
    View Size Chart...
    Clear selection
  • C06 Internal T Joint

    POA
    The Internal T joint is designed to provide an angled joint between a tube and a FastClamp fitting when used in conjunction with C02G and C03G type fittings. Often used for railing tops and midrails to accommodate a slope as offset railing
    # Tube Size A B C kg
    G2533.7 23 33 34 0.33
    G3242.4 29 42 40 0.54
    G4048.3 31 48 44 0.68
    View Size Chart...
    Clear selection
  • C07 45° Tee

    POA
    The 45° Tee is used as a bracing and strut component for strengthening structures.
    # Tube Size A kg
    G2533.7 45 0.38
    G3242.4 54 0.63
    G4048.3 60 0.83
    View Size Chart...
    Clear selection
  • C10G Swivel Base

    POA
    The Swivel Base is designed to provide a base fixing. It is usually used in conjunction with a C36G type fitting to make a C46G type base swivel combination. This fitting does not provide sufficient rigidity to be used as a railing base without other means of support.
    # Tube Size A B C D E kg
    #N/A 55 40 50 85 115 0.51
    View Size Chart...
    Clear selection
  • C11 Wall Flange

    POA
    The Wall Flange is designed to provide a positional wall or base fixing. It is not recommended to use this fitting as a structural railing base.
    # Tube Size A B C D Ø kg
    G2026.9 86 42 57 4 9 0.35
    G2533.7 89 45 64 6 9 0.39
    G3242.4 102 50 76 6 9 0.50
    G4048.3 114 57 89 6 9 0.65
    G5060.3 127 64 95 6 9 1.10
    View Size Chart...
    Clear selection
  • C12 Railing Base Flange

    POA
    The Railing Base is designed to provide a base for railings and other structures. It is recommended that this fitting be used in accordance with FastClamp maximum post centre dimensions, see table 3 on our FastClamp Technical Data page.
    # Tube Size A B C D E Ø kg
    G2026.9 76 65 8 76 114 11 0.60
    G2533.7 89 76 9 89 128 14 0.91
    G3242.4 89 80 10 102 140 14 1.03
    G4048.3 89 89 10 114 152 14 1.24
    G5060.3 128 88 9 127 165 18 1.89
    View Size Chart...
    Clear selection
  • C13 Railing Verticle Side Support

    POA
    The Railing Vertical Side Support is designed to provide a base for railings and other structures that need a side mounted fixing. It is recommended that this fitting be used in accordance with FastClamp maximum post centre dimensions, see table 3 on our FastClamp Technical Data page.
    # Tube Size A B C D E Ø kg
    G2533.7 45 96 67 28 104 14 0.95
    G3242.4 50 109 78 30 114 14 1.20
    G4048.3 60 123 86 34 120 14 1.50
    View Size Chart...
    Clear selection
  • C14 Railing Horizontal Side Support

    POA
    The Railing Horizontal Side Support is designed to provide a base for railings and other structures that need a side mounted fixing. It is recommended that this fitting be used in accordance with FastClamp maximum post centre dimensions, see table 3 on our FastClamp Technical Data page.
    # Tube Size A B C D Ø kg
    G2533.7 90 30 12 150 18 1.08
    G3242.4 90 35 12 150 18 1.32
    G4048.3 90 41 15 150 18 1.67
    View Size Chart...
    Clear selection
  • CA03 Add On Short Tee

    POA
    The Add On short Tee allows existing structures to be added to without the need for any dismantling. Tubes must not be jointed within this fitting.
    # Tube Size A B kg
    G2533.7 60 33
    G3242.4 60 55 0.60
    G4048.3 68 60 0.71
    View Size Chart...
    Clear selection
  • C15 Side Palm Fixing

    POA
    The Side Support is designed to provide a base for railings and other structures that need a side mounted fixing. It is recommended that this fitting be used in accordance with FastClamp maximum post centre dimensions, see table 3 on our Technical Data Page.
    # Tube Size A B C D E Ø kg
    G2533.7 76 89 71 63 97 11 0.63
    G3242.4 84 98 82 72 108 11 0.80
    G4048.3 92 104 86 78 112 11 0.84
    View Size Chart...
    Clear selection
  • CA40 Add On 90° Crossover

    POA
    The Add On 90° Crossover allows existing structures to be added to without the need for any dismantling. This fitting is designed to give a 90° offset crossover joint. Tubes must not be joined within this fitting.
    # Tube Size A B kg
    G3242.4 49 46 0.65
    G4048.3 55 50 0.73
    View Size Chart...
    Clear selection
  • C16 Handrail Bracket

    POA
    The Handrail Bracket is designed to secure handrail tube to a wall. It can also be used on top of walls as a fixing for a low rail.
    # Tube Size A B C D Ø kg
    G2026.9 46 57 54 76 8 0.36
    G2533.7 44 63 57 82 11 0.46
    G3242.4 44 76 63 102 11 0.57
    G4048.3 48 85 67 108 11 0.62
    View Size Chart...
    Clear selection
  • C00 Sleeve Joint

    POA
    The Sleeve Joint is designed to provide an in-line joint between two tubes of the same diameter.
    # Tube Size A kg
    G2026.9 76 0.33
    G2533.7 89 0.39
    G3242.4 102 0.50
    G4048.3 100 0.55
    G5060.3 120 1.14
    View Size Chart...
    Clear selection
  • C17 Ground Support

    POA
    The Ground Socket is designed to provide a base that can be cast into the ground to support a post. The post is removable. It is recommended that this fitting be used in accordance with FastClamp maximum post centre dimensions, see table 3 on our Technical Data Page.
    # Tube Size A B C D kg
    G2533.7 61 140 130 4.5 1.42
    G3242.4 61 140 130 4.5 1.42
    G4048.3 61 140 130 4.5 1.42
    View Size Chart...
    Clear selection
  • C01 Expanding Connector

    POA
    The expanding Connector is designed to provide an in line joint between tubes of the same diameter, and a wall thickness of 3.2mm. It fits flush with the tube surface and can be located inside other fittings. It must not be used as a load-bearing joint, for such applications use a FastClamp type C00.
    # Tube Size A B kg
    G2533.7 75 19 0.18
    G3242.4 75 19 0.27
    G4048.3 75 19 0.35
    View Size Chart...
    Clear selection
  • C02 90° Elbow

    POA
    The 90° Elbow is designed to provide a joint between two tubes at right angles to each other. Often used for railing ends and corners.
    # Tube Size A kg
    G2026.9 40 0.24
    G2533.7 48 0.39
    G3242.4 60 0.53
    G4048.3 67 0.68
    G5060.3 86 1.53
    View Size Chart...
    Clear selection
  • C03 Short Tee

    POA
    The Short Tee is designed to provide a butt joint between two tubes at right angles to each other. Often used for railing ends and tops. If tubes need to be joined inside the fitting then a C04G type should be used.
    # Tube Size A B kg
    G2026.9 40 38 0.21
    G3242.4 60 54 0.44
    G4048.3 67 60 0.56
    G5060.3 86 71 0.76
    View Size Chart...
    Clear selection
  • C04 Long Tee

    POA
    The Long Tee is designed to provide a butt joint between two tubes at right angles to each other. Often used for railing ends and tops. It allows the through tube to be joined inside the fitting. An alternative is the C03G type fitting.
    # Tube Size A B kg
    G2026.9 40 80 0.35
    G2533.7 48 96 0.52
    G3242.4 60 120 0.77
    G4048.3 67 134 0.88
    G5060.3 86 172 1.33
    View Size Chart...
    Clear selection
  • C05 Variable Elbow (15° to 60°)

    POA
    The Variable Elbow is designed to make joints at an angle of between 15° and 60°.
    # Tube Size A B C D kg
    G2533.7 67 50 13 40 0.43
    G3242.4 80 66 15 56 0.66
    G4048.3 95 75 21 52 0.91
    View Size Chart...
    Clear selection
  • C05A Variable Elbow (11° to 30°)

    POA
    The variable elbow is designed to make joints at an angle of between 11° & 30°.
    # Tube Size A B C D kg
    G3242.4 72 61 13 75 0.82
    G4048.3 85 73 19 84 1.01
    View Size Chart...
    Clear selection
  • C25 Short Tee Swivel (Normally used in pairs)

    POA
    Short Tee Swivel fittings are normally used in pairs to facilitate corner angles of 90° to 180°. It is also used on staircases with a C02 and C03 fittings in conjunction with a short piece of tube and a C65 Plastic End Cap in landing areas. When ordering please specify the number of fittings required, not the number of pairs.
    # Tube Size A kg
    G2026.9 65 0.31
    G2533.7 66 0.37
    G3242.4 73 0.48
    G4048.3 81 0.49
    G5060.3 110 0.85
    View Size Chart...
    Clear selection
  • C28 Adjustable 2 Socket Cross (30° to 45°)

    POA
    The Adjustable 2 Socket Cross fitting will accommodate any rake angle from 30° to 45°. This fitting is not recommended as the top fitting on a guardrail or balustrade system, use the C29 Adjustable Short Tee.
    # Tube Size A kg
    G2533.7 162 0.71
    G3242.4 190 1.12
    G4048.3 218 1.38
    View Size Chart...
    Clear selection
  • C29 Adjustable Short Tee (30° to 60°)

    POA
    The Adjustable Short Tee fitting will accommodate any rake angle from 30° to 60°. This fitting is commonly used for the top rail of handrail to accommodate the rake angle on slopes. It can also be used for any Tee Joint to make at an angle of between 30° and 60° for light weight structures.
    # Tube Size A B kg
    G2533.7 74 52 0.47
    G3242.4 85 63 0.63
    G4048.3 102 72 0.78
    View Size Chart...
    Clear selection
  • C30 Collar

    POA
    The Collar fitting can be used to support the C03 fitting when the latter is used as a hinge. It can also be used to increase the load capacity of another fitting when used together. The C30 can be used as a stop for a sliding tube.
    # Tube Size A kg
    G2026.9 25 0.08
    G2533.7 25 0.13
    G3242.4 25 0.16
    G4048.3 25 0.18
    G5060.3 40 0.32
    View Size Chart...
    Clear selection
  • C31 Gate Eye

    POA
    This fitting is designed as a gate eye for light weight gates. If a heavy gate is being used we recommend that C03 and C30 type fittings are used to support the gate.
    # Tube Size A B C kg
    G2026.9 25 30 15 0.14
    G2533.7 25 33 15 0.19
    G3242.4 25 38 15 0.25
    G4048.3 25 41 15 0.26
    View Size Chart...
    Clear selection

Call FastClamp on +44 (0)1384 632385 for a FREE quotation and to discuss your project.


Call FastClamp on +44 (0)1384 632385 for a FREE quotation and to discuss your project

logo
Phone
Cart/ Order
Contact Us